Product specifications and models are not all uploaded, if necessary, you can contact the online personnel. Look forward to hearing from you thank you.
SME-8-K-LED-230
152820
Technical Data
DesignFor T-slot
Conforms to standardEN 60947-5-2
Symbol00991624
ApprovalCCC RCM trademark
CE mark (see declaration of conformity)To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
CE marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions To UK regulations for electrical equipment
Note on materialsRoHS-compliant
Instructions on useSupport / actuator-sensor overview "The right sensor for the actuator"
Measured variablePosition
Measuring principleMagnetic reed
Ambient temperature-30 °C ... 60 °C
Repetition accuracy0.2 mm
Switching outputContacting, bipolar
Switching element functionN/O contact
Reproducibility of switching value+/-0.1 mm
Switch-on time2 ms
Switch-off time0.03 ms
Max. switching frequency500 Hz
Max. output current120 mA
Max. switching capacity AC10 VA
Max. switching capacity DC10 W
Voltage drop≤3.9 V
Inductive protective circuitAdapted to MZ, MY, ME coils
Min. load current5 mA
Off-state current0 mA
Short circuit current ratingno
Overload protectionNot available
Operational voltage range AC3 V ... 230 V
Operational voltage range DC3 V ... 230 V
Reverse polarity protectionno
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores2
Connection outlet orientationIn-line
Cable length2.5 m
Cable sheath colourgrey
Material cable sheathTPE-U(PUR)
Type of mountingClamped in T-slot Insertable in the slot lengthwise
Tightening torque0.2 Nm
Mounting positionoptional
Product weight39 g
Housing colourBlack
Material housingEpoxy resin PET High-alloy stainless steel
Switching status indicationYellow LED
Ambient temperature with moving cable-5 °C ... 60 °C
Degree of protectionIP68
Insulation voltage2500 V
Immunity to surge4 kV
Vibration resistance to DIN/IEC 68 Part 2-6Tested to severity level 2
Continuous shock resistance to DIN/IEC 68 Part 2-82Tested to severity level 2
Audited Supplier 
){kind=link}