Product specifications and models are not all uploaded, if necessary, you can contact the online personnel. Look forward to hearing from you thank you.
SMT-10M-NS-24V-E-2,5-L-OE
551377
Technical Data
DesignFor C-slot
Conforms to standardEN 60947-5-2
Symbol00991149
ApprovalRCM trademark
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
CE marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions
Special characteristicsOil resistant
Note on materialsRoHS-compliant Free of halogen
Measured variablePosition
Measuring principleMagneto-resistive
Ambient temperature-40 °C ... 70 °C
Repetition accuracy0.2 mm
Switching outputNPN
Switching element functionN/O contact
Switch-on time≤1.3 ms
Switch-off time4.2 ms ... 7.3 ms
Max. switching frequency130 Hz
Max. output current100 mA
Max. output current using mounting kits50 mA
Max. switching capacity DC2.8 W
Max. switching capacity DC using mounting kits1.5 W
Voltage drop≤1.5 V
Short circuit current ratingyes
Overload protectionAvailable
Rated operational voltage DC24 V
Operational voltage range DC5 V ... 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores3
Connection outlet orientationIn-line
Test conditions cableBending strength: to standard Test conditions on request Torsional resistance: > 300,000 cycles, ± 270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length2.5 m
Cable characteristicSuitable for energy chains/robot applications
Material cable sheathTPE-U(PUR)
Type of mountingScrew-clamped Insertable in the slot from above
Max. tightening torque0.4 Nm
Mounting positionoptional
Product weight16.8 g
Material housingPA-reinforced High-alloy stainless steel
Switching status indicationYellow LED
Ambient temperature with moving cable-20 °C ... 70 °C
Degree of protectionIP65 IP68
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesMetals with more than 1% by mass of copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils